TL V6-3.2L (2004)
1. Position the damper assembly (A) in the body with the aligning tab (B) facing inside, then loosely install the flange nuts.
2. Install the damper fork (A) over the driveshaft and onto the lower arm. Install the front damper in the damper fork so the aligning tab (B) is
aligned with the slot (C) in the damper fork.
3. Loosely install the damper pinch bolt (D) into the damper fork.
4. Install the flange bolt (E) to the damper fork and lower arm, then lightly tighten the new damper fork mounting nut (F).
NOTE: Use a new damper fork mounting nut on reassembly.
