TL V6-3.2L (2004)
15. Disconnect the ATF temperature sensor connector (A), and remove it from the bracket.
16. Remove the three bolts securing the ATF temperature sensor/harness, then remove the ATF temperature sensor (B).
17. Install the new O-ring (C) on the new ATF temperature sensor, then install the sensor.
18. Install the ATF temperature sensor harness (D) with the bolts.
19. Check the connector for corrosion, dirt, and oil, then connect the connector securely.
20. Install the transmission lower front mount.
21. Lower the transmission onto the front subframe.
22. Install the transmission lower mount nuts.
23. Install the splash shield and transmission under cover.
24. Lower the vehicle.
25. Install the transmission upper mount bracket, bracket plate, and remove the transmission jack.
26. Refill the transmission with ATF.
27. Install the air cleaner housing and intake air duct.
28. Install the left side engine compartment cover.
29. Enter the radio and navigation anti-theft codes, and set the XM radio channel presets and the clock.
