TL V6-3.2L (2004)
11. Remove the clutch fluid reservoir mounting bolt.
12. Disconnect the clutch line from the bracket.
13. Detach the clutch line from the clamp(s).
14. Remove the clutch master cylinder.
15. Disconnect the clutch fluid reservoir hose and the clutch line:
^
Remove the retaining clip.
^
Remove the clutch line from the clutch master cylinder.
^
Wrap the ends of the reservoir hose and the clutch line with shop towels to prevent brake fluid from coming out.
16. Remove the 0-ring and the clutch master cylinder seal from the clutch master cylinder.
17. Apply brake assembly lube to the clutch line, and install a new 0-ring and clutch master cylinder seal.
