TL V6-3.2L (2004)
23.
Apply a small amount of engine oil to the seating surface of a new spindle nut.
24.
Install the new spindle nut, and torque it to 285 N.m (210 lb-ft). After torquing the nut, stake its shoulder to the end of the driveshaft with a drift.
25.
Clean the mating surface of the brake disc and the right front wheel, then reinstall the wheel. Torque the wheel nuts to 108 N.m (80 lb.ft).
26.
Turn the right front wheel by hand while checking for interference between the driveshaft and any parts. If you find interference, recheck your
work.
Disclaimer
