TL V6-3.2L (2004)
A/T model
Special Tools Required
-
Driver 07749-0010000
-
Attachment, 52 x 55 mm 07746-0010400
-
Attachment, 35 mm I.D. 07746-0030400
-
Oil seal driver 07GAD-PH70201
NOTE: Refer to the Exploded View as needed during this procedure.
1. Clean the disassembled parts with solvent, and dry them with compressed air. Do not wash the rubber parts with solvent.
2. Press the intermediate shaft bearing (A) into the bearing support (B) using the special tools and a press.
