TL V6-3.2L (2004)
9. Remove the oil filler plug (A) and washer (B).
10. Refill the fluid from the oil filler plug hole of transmission, and until the transmission fluid overflows from the oil check bolt hole (A).
11. After the fluid stops overflowing, install the oil check bolt (B) with a new washer (C).
Fluid Capacity
2.2 ohms (2.3 US qt) at fluid change
2.5 ohms (2.6 US qt) at overhaul
Always use Honda Manual Transmission Fluid (MTF). Using engine oil can cause stiffer shifting because it does not contain the proper additives.
12. Install the oil filler plug (A) with a new washer (B).
13. Install the battery base.
14. Install the air cleaner housing.
15. Install the battery. Connect the positive (+) cable first, then the negative (-) cable to the battery.
16. Install the left rear engine compartment cover and the left side engine compartment cover.
17. Enter the anti-theft codes for the radio and navigation system, then enter the customer's XM radio channel presets.
