TL V6-3.2L (2004)
Transmission Temperature Sensor/Switch: Service and Repair
ATF Temperature Sensor Replacement
1. Make sure you have the customer's radio and navigation anti-theft codes, and write down the XM radio channel presets.
2. Remove the left side engine compartment cover.
3. Make sure the ignition switch is OFF. Disconnect the battery negative terminal, then disconnect the battery positive terminal.
4. Remove the battery hold-down bracket, then remove the battery and battery tray.
5. Remove the intake air duct and air cleaner housing.
6. Remove the transmission upper mount bracket (A) and bracket plate (B).
7. Raise the vehicle on a lift.
8. Remove the transmission under cover.
9. Remove the splash shield.
