TL V6-3.2L (2004)
5. Clean the run channel using a soapy water solution, then apply Shin-Etsu grease. You may also need to clean the portion of the run channel within the
door.
6. Reinstall all removed parts.
REPAIR PROCEDURE
1. Compare the window's noise level to another like vehicle:
^
If the noise is the same, no repair is needed. Advise the client that some noise is a normal characteristic.
^
If the noise is different from the other vehicle, go to step 2.
2. Inspect the run channel for damage.
^
If it is damaged, replace it, then recheck the noise level.
^
If the run channel is not damaged, go to step 3.
3. Remove the door panel.
4. Unbolt the glass from the regulator, then manually slide it through its travel to check for excessive resistance.
^
If the resistance is excessive, go to step 5.
^
If the resistance is not excessive, go to step 6.
