TL V6-3.2L (2004)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Be careful of sharp edges.
1. Remove these items:
-
Door panel
-
Plastic cover, as necessary
2. Carefully move the glass (A) until you can see the bolts, through the holes in the door frame, then remove them. Remove the glass from the
regulator (B), and carefully lower the glass. Take care not to drop the glass inside the door.
3. Pull the glass run channel (A) away as needed. Pull the door weatherstrip (B) away as needed, then remove the screw (C) with a T15 Torx bit.
Remove the bolts (D, E) securing the center channel (F), then remove the collar (G).
