TL V6-3.5L (2007)
1. Remove the rear shelf.
2. Remove the three mounting screws from the rear speaker (A).
3. Disconnect the 2P connector (B), and remove the rear speaker.
4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 ohms.
5. If the resistance is not as specified, replace the rear speaker.
NOTE: Align the speaker on the locating tabs (A) of the mounting grommet.
Subwoofer
1. Remove the rear shelf.
2. Remove the four mounting bolts from the subwoofer (A).
