TL V6-3.5L (2007)
Rear Bumper: Service and Repair
Rear Bumper Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Put on gloves to protect your hands.
-
Have an assistant help you when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper and body.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. TYPE S model: Remove the rear bumper trim.
2. Remove the caps (A). Remove the clips (B), screws (C, D), and bolts (E) securing the rear bumper (F).
3. Pull on the rear bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).