TL V6-3.5L (2007)
Trunk / Liftgate Spring: Service and Repair
Trunk Lid Torsion Bar Replacement
Special Tools Required
Torsion bar assembly tool 07AAF-SNAA100
1. Remove the torsion bars (A) from the torsion bar center clip (B).
2. Put on gloves to protect your hands. Remove the torsion bars with the torsion bar assembly tool (A) from both trunk lid hinges. First remove the
left torsion bar (B), then remove the right torsion bar (C).
3. Remove the torsion bar center clip from the body.
