TL V6-3.5L (2007)
Cowl Moulding / Trim: Service and Repair
Cowl Cover Replacement
NOTE:
-
Take care not to scratch the cowl cover and body.
-
Use a clip remover to remove the hood rear seal clips.
-
Put on gloves protect your hands.
1. Remove the windshield wiper arms.
2. Release the hooks (A, B, C), then remove the left rear engine compartment cover (D) from the clip (E).
3. Remove the right side engine compartment cover.
4. Release the hooks (A), then remove the right rear engine compartment cover (B) from the clips (C).
