TL V6-3.5L (2007)
Rear Fender Liner: Service and Repair
Rear Inner Fender Replacement
NOTE:
-
Take care not to scratch the body.
-
Put on gloves protect your hands.
1. Remove the fuel pipe protector.
2. Remove the rear inner fender (A).
1. Remove the screws (B) from the front and rear of the rear inner fender.
2. Remove the bolts (C) and clips (D, E, F).
3. Pull out the rear inner fender.
NOTE: Driver's side shown, passenger's side is similar.
3. Install the inner fender in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.
