TL V6-3.5L (2007)
Carpet: Service and Repair
Front Carpet Replacement
Front Carpet Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to damage, wrinkle or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
1. Make sure you have the anti-theft codes for the audio and the navigation system (if equipped), then write down the audio presets.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Remove these items:
-
Front seats, both sides
-
Front door sill trim, both sides
-
Kick panel, both sides
-
Center console rear section
-
Center console panel
-
Rear vent duct
-
Fuel fill door opener cover
-
Driver's dashboard undercover
-
Passenger's dashboard undercover
-
Steering joint cover
4. Push the knob (A) back to release the hook (B) then pull up the accelerator pedal (C).
