TL V6-3.5L (2007)
Headliner: Service and Repair
Headliner Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend and scratch the headliner.
-
Be careful not to damage the dashboard and other interior trim.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove these items:
-
A-pillar trim, both sides
-
B-pillar upper trim, both sides
-
C-pillar trim, both sides
-
Rear map light
-
Sunvisors, both sides
-
Grab handles, four places
2. Remove the front individual map lights, and remove the bolts securing the roof console (A).
3. Release the clips (A, B), then remove the high mount brake light cover (C).
