TL V6-3.5L (2007)
3. Pull the front door sill trim (A) up by hand to detach the clips (B), and to release the hooks (C) and tabs (D) from the B-pillar lower trim (E), then
remove the trim.
4. If necessary, pull the front side outer trim (F) up to detach the clips (G), then remove the trim.
5. Pull out the front door opening trim (A) from the trim hooks (B) and around the front door opening flange, then remove the trim.
6. Install the trim in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.
Rear Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the rear seat cushion.