TL V6-3.5L (2007)
Sunroof / Moonroof Drain: Service and Repair
Drain Channel Replacement
Drain Channel Replacement
Special Tools Required
Trim pad remover, Snap-on A 177A, or equivalent, commercially available
1. Remove the glass.
2. Insert the trim tool between the glass brackets (A) and the drain channel. Twist the trim tool to unsnap the pins (B), then gently push the ends of
the drain channel towards the center of the vehicle to disengage the pins from the glass bracket.
3. Turn the drain channel (A) up while sliding it forward to release it from the pins (B) on both drain channel sliders (C).
4. Stand the drain channel (A) upright, and pull up the channel to remove it from both drain channel sliders (B).
5. Install the channel in the reverse order of removal, and check the glass position adjustment.
6. Do the moonroof calibration.
7. Check for water leaks. Let the water run freely from a hose without a nozzle. Do not use a high-pressure spray.
