TL V6-3.5L (2007)
Seat Cover: Service and Repair
Front Seat-Back Cover
Front Seat-back Cover Replacement
Special Tools Required
KTC trim tool set SOJAT2014 *
* Available through the American Honda Tool and Equipment Program.
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to tear the seams or damage the seat covers.
-
On the passenger's seat, do not touch the OPDS sensor in the seat-back pad, and keep it away from oil. Oil can corrode the sensor causing it to fail.
1. Remove the front seat.
2. Remove the seat-back.
3. Detach the clips and hooks (A) by pulling the bottom of the back panel (B) back, then pull the panel upward to release the hooks (C) from the seat
back frame, and remove the panel.
4. Remove the clips (A) and release the hook strips (B), then loosen the seat-back cover (C).