TL V6-3.5L (2007)
14. Hold the pad spring, and install the pad pins (B) into the caliper from the inside to the outside of vehicle using the special tool.
15. Press the brake pedal several times to make sure the brakes work.
NOTE: Engagement of the brakes may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several
applications of the brake pedal will restore the normal pedal stroke.
16. Add brake fluid as needed.
17. After installation, check for leaks at the brake hose and line joints or connections, and retighten if necessary. Test-drive the vehicle, then check for
leaks.
