acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Coolant Drain Plug, Cylinder Block > < Cooling System|Capacity Specifications|Page 2502
Page 2
background image

cooling system to malfunction or fail.

^

Acura Long Life Antifreeze/Coolant Type 2 is a mixture of 50% antifreeze and 50% water. Do not add water.

10. Loosely install the radiator cap.
11. Start the engine, and let it run until it warms up (the radiator fan comes on at least twice).
12. If the maintenance minder required engine coolant replacement, reset the maintenance minder, and this procedure is complete. If the maintenance

minder did not require engine coolant replacement, go to step 13.

13. Connect the Honda Diagnostic System (HDS) to the data link connector (DLC).
14. Make sure the HDS communicates with the vehicle and the engine control module (ECM)/powertrain control module (PCM). If it doesn't

communicate, troubleshoot the DLC circuit.

15. Turn the ignition switch ON (II).
16. Select BODY ELECTRICAL with the HDS.
17. Select ADJUSTMENT in the GAUGE MENU with the HDS.
18. Select RESET in the MAINTENANCE MINDER with the HDS.
19. Select MAINTENANCE SUB ITEM 5 RESET with the HDS.
20. Turn off the engine. Check the level in the radiator, and add Acura Long Life Antifreeze/Coolant Type 2, if needed.
21. Put the radiator cap on tightly, then run the engine again, and check for leaks.
22. Clean up any spilled engine coolant.
23. Reset the multi-information display.

Coolant Drain Plug, Cylinder Block > < Cooling System|Capacity Specifications|Page 2502