TL V6-3.5L (2007)
Rocker Arm Assembly: Removal and Replacement
Rocker Arm Assembly Removal
Rocker Arm Assembly Removal
1. Remove the cylinder head cover.
2. Loosen the adjusting screws (A).
3. Remove the bolts and the rocker arm assembly.
-1 Loosen the rocker shaft mounting bolts two turns at a time, to prevent damaging the valves or rocker arm assembly.
-2 When removing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and the rocker arms
on the shafts.
