TL V6-3.5L (2007)
34. Grease the lip of the crankshaft oil seal, and apply new engine oil to the new O-ring (A).
35. Install the dowel pins (B), then align the inner rotor with the crankshaft and install the oil pump (C).
36. Clean the excess grease off the crankshaft, and check the seal for distortion.
37. Install the baffle le plate (D), then install the oil screen (E) with a new O-ring (F).
38. Install the rocker arm oil control solenoid/oil filter assembly (A), with a new rocker arm oil control solenoid filter (B).
39. Install the oil pan.
40. Install the crankshaft position (CKP) sensor.
41. Install the cylinder heads.
42. M/T model: Install the flywheel.
43. A/T model: Install the drive plate.
44. Install the transmission.
45. Install the engine.
