TL V6-3.5L (2007)
Information Bus: Component Tests and General Diagnostics
MICU Input Test
MICU Input Test
NOTE: Make sure the ignition switch is OFF before troubleshooting the under-dash fuse/relay box connectors.
1. Remove the left kick panel.
2. Disconnect the under-dash fuse/relay box connectors D, E, F, G, H, J, K, M, N, P, W and X.
NOTE: All connectors are wire side of female terminals.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
-
If the terminals look OK, go to step 4.