TL V6-3.5L (2007)
Information Bus: Reading and Clearing Diagnostic Trouble Codes
Without Scan Tool
Gauge Control Module DTC Display
Set the multiplex in B-CAN System Diagnosis Test mode 1. While in Test Mode 1, the DTCs which have been detected and stored individually by
various B-CAN (Body-controller Area Network) units, will be shown one by one on the multi-information display when the communication between the
Multiplex Integrated Control Unit (MICU) and the gauge control module are normal. To scroll through the DTCs, press the SELECT/RESET button
beside the gauge control module.
The unit that has stored the code can be identified by the number shown on the multi-information display.
