TL V6-3.5L (2007)
Fuel Tank Unit: Service and Repair
Fuel Tank Unit Removal/Installation
Fuel Tank Unit Removal/Installation
Special Tools Required
Fuel sender wrench 07AAA-S0XA100
Removal
1. Relieve the fuel pressure.
2. Remove the fuel fill cap.
3. Remove trunk floor trim panel.
4. Remove the access panel (A) from the floor.
5. Disconnect the fuel tank unit 5P connector (B).
6. Disconnect the quick-connect fittings (C) from the fuel tank unit.
7. Using the special tool, loosen the locknut (A).