TL V6-3.5L (2007)
After a collision, where a side curtain airbag has deployed, replace all trim clips on that side, even if they appear to be undamaged.
During the repair process, inspect these areas.
-
Inspect all the SRS wire harnesses. Replace, don't repair, any damaged harnesses.
-
Inspect the cable reel for heat damage. If there is any damage, replace the cable reel.
After the vehicle is completely repaired, turn the ignition switch ON (II). If the SRS indicator comes on for about 6 seconds and then goes off, the SRS is
OK. If the indicator does not function properly, use the HDS SRS Menu Method to read the DTC.
Checking and Adjusting the Headliner/Pillar Trim Overlap
The headliner and pillar trim must overlap less a 15 mm. To check the overlap, do this:
