TL V6-3.5L (2007)
Seat Belt: Service and Repair
Front Seat Belt Replacement
Front Seat Belt Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE: Check the front seat belts for damage, and replace them if necessary.
Front Seat Belt
1. Make sure you have the anti-theft codes for the audio and the navigation system (if equipped), then write down the audio presets.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Slide the front seat forward fully.
4. Remove the B-pillar lower trim.
5. Driver's seat belt: Pull the lower anchor cover (A) up, and remove the lower anchor bolt (B) and double-shouldered washer (C).
6. Passenger's seat belt: Detach the front seat belt latch plate (A).
1. Pull out the recline cover cap (B) to release the hooks (C), and remove the cap by pulling it up.
2. Push the top of the lock (D) in to detach the latch plate from the lower anchor (E).
7. Remove the B-pillar upper trim and slider.
