acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Brake Light Switch > < Backup Lamp Switch|Locations|Page 799
Page 2
background image

housing. Tighten the back-up light switch to the specified torque.

NOTE:  
^

If you apply liquid gasket P/N 08718-0012, the component must be install with 4 minutes.

^

If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new gasket.

10. Install the battery base.
11. Install the air cleaner assembly.
12. Install the battery. Clean the battery posts and cable terminals. Connect the positive cable to the battery first, then connect the negative cable, and

apply multipurpose grease to prevent corrosion.

13. Install the left rear engine compartment cover and the left side engine compartment cover.
14. Enter the anti-theft codes for the audio unit and navigation system, then enter the audio presets and set the clock.

Brake Light Switch > < Backup Lamp Switch|Locations|Page 799