TL V6-3.5L (2007)
Alternator: Removal and Replacement
Alternator Removal and Installation
Removal
1. Make sure you have the anti-theft codes for the audio system and navigation system (if equipped).
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
3. Disconnect the A/C condenser fan motor connector (A) and the A/C compressor clutch connector (B), then remove the coolant reservoir (C).
4. Remove the two upper bolts (D), loosen the lower bolt (E), then remove the A/C condenser fan shroud assembly.
5. Remove the drive belt.
6. Disconnect the alternator connector (A) and the BLK wire (B) from the alternator.
7. Remove the bolt (C) securing the harness bracket.
