TL V6-3.5L (2007)
1. Install the starter, then install the harness clamp (A), connect the starter cable (B) to B terminal and the BLK/WHT wire (C) to the S terminal.
Make sure the crimped side of the ring terminal faces away from the starter when you connect it.
NOTE: Always use a new gasket (A/T model).
2. Install the battery tray and the battery.
3. Connect the positive cable to the battery first, then connect the negative cable.
4. Start the engine to make sure the starter works properly.
5. Reinstall the left side engine compartment cover.
6. Enter the anti-theft codes for the audio system and navigation system (if equipped).
7. Set the clock.
