TL V6-3.5L (2007)
3. Remove the brake hose mounting bracket (A).
4. Remove the brake caliper bracket mounting bolts (B), and remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose with force.
5. Remove the hub cap (A).
6. Raise the stake (B), then remove the spindle nut (C).
7. Release the parking brake, and remove the brake disc/drum (A) from the hub bearing unit.
NOTE:
^
If the brake disc/drum cannot be removed, remove the access plug (B), then, turn the adjuster bolt (C) with a flat-tip screwdriver until the shoes
become loose.
^
If the brake disc/drum has clung to the hub bearing unit. Screw two 8 x 1.25 mm bolts (D) into the brake disc/drum to push it away from the
hub bearing unit. Turn each bolt 90 degrees at a time to prevent cocking the brake disc/drum.
^
After installation, if you loosened the parking brake shoes, do the parking brake minor adjustment.