TL V6-3.5L (2007)
Fluid Pressure Sensor/Switch: Service and Repair
4th Clutch Transmission Fluid Pressure Switch Replacement
4th Clutch Transmission Fluid Pressure Switch Replacement
1. Remove the battery trim and left upper fender cover.
2. Remove the intake air duct and air cleaner assembly.
3. Remove A/T clutch pressure control solenoid valve C.
4. Disconnect the 4th clutch transmission fluid pressure switch connector.
5. Remove the 4th clutch transmission fluid pressure switch (A).
6. Make sure there is no water, oil, dust, or foreign particles inside the connector.
7. Install the new 4th clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
8. Install A/T clutch pressure control solenoid valve C.
9. Connect the connectors securely.
10. Install the intake air duct and air cleaner assembly.
11. Install the left upper fender cover and battery trim.