TL V6-3.5L (2007)
Transmission Cooler: Removal and Replacement
ATF Cooler Replacement
1. Remove the splash shield.
2. Remove the front bumper.
3. Disconnect the ATF cooler hoses (A) from the ATF cooler lines (B).
4. Remove the ATF cooler assembly (C).
5. If needed, remove the ATF cooler (A) from the stay (B).
6. Install the ATF cooler assembly in the reverse order of removal. If ATF cooler hoses are disassembled from ATF cooler, reassemble the ATF
cooler hoses referring to ATF cooler hose replacement.
7. Connect the ATF cooler hoses.
8. Install the front bumper.
9. Install the splash shield.