TL V6-3.5L (2007)
Fluid - M/T: Service and Repair
Transmission Fluid Inspection and Replacement
NOTE: Use fender covers to avoid damaging painted surfaces.
1. Raise the vehicle on the lift.
2. Remove the engine undercover.
3. Remove the check bolt (A) and washer (B). Check the condition of the fluid and make sure it is at the proper level (C). If the fluid is dirty, remove
the drain plug (D) and washer (E).
4. Install the check bolt with a new washer.
5. Install the drain plug with a new washer.
6. Remove the left rear engine compartment cover (A) and the left side engine compartment cover (B).
7. Make sure you have the anti-theft codes for the audio unit and the navigation system, then write down the audio presets.
8. Disconnect the negative cable from the battery, then disconnect the positive cable.
9. Remove the battery.
10. Remove the air cleaner assembly.
11. Remove the battery base.