TL V6-3.5L (2007)
Power Window Switch: Service and Repair
Passenger's Power Window Switch Test/Replacement
Passenger's Power Window Switch Test/Replacement
Front Passenger's
NOTE: To test the front passenger's power window switch, refer to the input test.
1. Remove the front passenger's door panel and arm rest.
2. Remove the screw and disconnect the connector (A) from the front passenger's power window switch (B), then remove the switch assembly from
the door panel.
3. Remove the three mounting screws, then remove the front passenger's power window switch from the switch panel (C).
4. Install in the reverse order of removal.
5. Reset the power window control unit.
Rear
1. Remove the rear door panel and arm rest.
2. Remove the screw and disconnect the connector (A) from the rear power window switch (B), then remove the switch assembly from the door
panel.
3. Remove the three mounting screws, then remove the rear power window switch from the switch panel (C).
4. Swap the rear power window switch with another known-good switch and test. If the original rear power window switch is faulty; replace it.
5. Install in the reverse order of removal.
