TL V6-3.5L (2007)
12. Attach the upper rubber dam (A), side rubber dams (B) with adhesive tape A, clips (C) with adhesive tape B, and fasteners (D) with adhesive tape
C to the inside face of the rear window (E) as shown:
-
First attach the upper rubber dam, then attach the side rubber dams around the edge of the rear window. Be sure top of the side rubber dam
contacts with bottom of the upper rubber dam. If necessary, cut the rubber dam.
-
Be sure the side rubber dam, clips, and fasteners line up with the alignment marks (F).
-
Be careful not to touch the windshield where adhesive will be applied.