TL V6-3206cc 3.2L SOHC MFI (1998)
5. Check the connecting rod bearing clearance with plastigage, then torque the connecting rod cap nuts.
NOTE: Reference numbers on the connecting rods are for big-end bore tolerance and do NOT indicate the position of the piston in the engine.
6. Tighten the 9 x 1.25 mm cap bolts to the specified torque.
Torque: 39 Nm (29 ft. lbs.)
7. Tighten the 11 x 1.5 mm cap bolts to the specified torque.
Torque: 76 Nm (56 ft. lbs.)
