TL V6-3206cc 3.2L SOHC MFI (1998)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
REPLACEMENT
When installing and tightening the pulley, follow the procedure below.
Clean, remove any oil, and lubricate the points.
Crankshaft pulley bolt size and torque value:
16 x 1.5 mm
245 Nm (181 ft. lbs.)
NOTE:
-
Do not use an impact wrench when installing.
-
Remove the center bracket before removing the crankshaft pulley.
