TL V6-3206cc 3.2L SOHC MFI (1998)
1. Measure the diameter of the piston pin.
Piston Pin Diameter:
Standard (New): 21.994 - 22.000 mm (0.8659 - 0.8661 inch)
Oversize: 21.997 - 22.003 mm (0.8660 - 0.8663 inch)
NOTE: All replacement piston pins are oversize.
2. Zero the dial indicator to the piston pin diameter.
3. Measure the piston pin-to-piston clearance.
Piston Pin To Piston Clearance:
Standard (New): 0.010 - 0.019 mm (0.0004 - 0.0007 inch)
NOTE: Check the piston for distortion or cracks.
If the piston pin clearance is greater then 0.024 mm (0.0009 inch), remeasure using an oversize piston pin.
