TL V6-3206cc 3.2L SOHC MFI (1998)
Water Pump: Service and Repair
INSPECTION
1. Remove the timing belt.
2. Turn the water pump pulley counterclockwise. Check that it turns freely.
3. Check for signs of seal leakage.
NOTE: A small amount of "weeping" from the bleed hole is normal.
REPLACEMENT
1. Remove the timing belt.
2. Remove the left camshaft pulley and back cover.
3. Remove the water pump.
NOTE: Inspect, repair and clean the O-ring groove and mating surface with the cylinder block.
4. Install the water pump in the reverse order of removal.
NOTE:
-
Keep the O-ring in position when installing.
-
Clean the spilled engine coolant.