TL V6-3206cc 3.2L SOHC MFI (1998)
Differential Fluid - A/T: Service and Repair
MAINTENANCE
DIFFERENTIAL OIL
NOTE: Check the differential oil with engine OFF, and the vehicle on level ground.
1. Remove the oil filter plug, then check the level and condition of the oil.
2. The oil level must be up to the fill hole. If it is below the hole, add oil until it runs out, then reinstall the oil filler plug with a new washer.
3. If the differential oil is dirty, remove the drain plug, and drain the oil.
4. Reinstall the drain plug with a new washer, and refill the differential oil to the proper level.
NOTE:
-
The drain plug washer should be replaced at every oil change.
-
Clean the drain plug before reinstalling.
5. Reinstall the oil filler plug with a new washer.
Oil Capacity
1.05 l (1.11 US quart, 0.92 Imp quart) at oil change
1.10 l (1.16 US quart, 0.97 Imp quart) at overhaul
Recommended oil:
Hypoid gear oil API Classification GL4 or GIL5 viscosity:
SAE 90 above 0°F (-18°C)
SAE 80 W - 90 below O°F (- 18°C)