TL V6-3206cc 3.2L SOHC MFI (1998)
Timing Belt: Adjustments
TENSION ADJUSTMENT
CAUTION:
-
Always adjust the timing belt tension with the engine cold.
-
Do not rotate the crankshaft when the adjusting bolt is loose.
NOTE:
-
The tensioner is spring-loaded to apply tension to the belt automatically after making the following adjustment.
-
Inspect the timing belt before adjusting the belt tension.
-
Always rotate the crankshaft clockwise when viewed from the pulley side. Rotating it counterclockwise may result in improper adjustment of the
belt tension.
1. Remove the left upper cover.
2. Remove the center bracket (As shown in the images).
3. Set the No. 1 piston at TDC.
4. Rotate the crankshaft clockwise nine teeth on the camshaft pulley (The blue mark on the crankshaft pulley should line up with the pointer on the
lower cover).
5. Loosen the timing belt adjusting bolt 180°.
6. Tighten the adjusting bolt, torque to 42 Nm (31 ft. lbs.).
