TL V6-3206cc 3.2L SOHC MFI (1998)
4. Install the timing belt in the sequence shown.
(1) Timing belt drive pulley (crankshaft) ->(2) Adjusting pulley ->(3) Left camshaft pulley ->(4) Water pump pulley ->(5) Right camshaft pulley.
NOTE:
-
For easier installation, advance the right camshaft pulley by about a half tooth from the TDC position.
-
Make sure the timing belt drive pulley and camshaft pulleys are at TDC.
5. Loosen and retighten the adjusting bolt to tension the timing belt.
6. Install the upper and lower covers.
NOTE: Clean the upper and lower covers before installation.
7. Install the crankshaft pulley, then tighten the pulley bolt.
8. Rotate the crankshaft pulley about five or six turns clockwise so that the timing belt positions on the pulleys.
9. Adjust the timing belt tension.
