TL V6-3206cc 3.2L SOHC MFI (1998)
Oxygen Sensor: Service and Repair
Left Side
REPLACEMENT
Primary Heated Oxygen Sensor (H02S):
1. Disconnect the left and/or right primary H02S connector, then remove the left and/or right primary H02S.
2. Install the left and/or right primary H02S in reverse order of removal.
Secondary H02S:
1. Move the front passenger's seat forward. Pull the carpet back to expose the secondary H02S connector.
2. Disconnect the secondary H02S connector.
3. Remove the wire harness cover, then remove the grommet.