TL V6-3206cc 3.2L SOHC MFI (1998)
Alternator: Adjustments
Alternator Belt Inspection and Adjustment
Deflection method:
Apply a force of 98 N (10 kgf, 22 lbf), and measure the deflection between the alternator and crankshaft pulley.
Deflection: 9.0 - 11.5 mm (0.35 - 0.45 in)
Alternator Belt Inspection And Adjustment
NOTE: On a brand-new belt (one that has been run for less than five minutes), the deflection should be 5.5 - 7.0 mm (0.22 - 0.28 in) when first
measured. If the belt is worn or damaged, replace it.
Belt tension gauge method:
Attach the belt tension gauge to the belt and measure the tension. Follow the gauge manufacturer's instructions.
Tension: 390 - 590 N (40 - 60 kgf, 88 - 132 lbf)
Alternator Belt Inspection And Adjustment
NOTE: On a brand-new belt, (one that has been run for less than five minutes), the tension should be 785 - 980 N (80 - 100 kgf, 176 - 220 lbf) when