TL V6-3206cc 3.2L SOHC MFI (1998)
NOTE: Some splash guard mounting bolts are also used as gearbox mounting bolts. The gearbox will tilt to the side when these bolts are
removed.
10. Remove the line clamps and line mounting cushions from the gearbox.
11. Disconnect the two lines (feed line and sensor return line) from the valve body unit upper side.
CAUTION: After disconnecting the pipes, plug or seal the line fittings with a piece of tape or equivalent to prevent foreign materials from the
entering the valve body unit;
12. Disconnect the two lines (sensor inlet line and return line) from the valve body unit lower side.
