TL V6-3206cc 3.2L SOHC MFI (1998)
29. Tighten the flange bolts to the specified torque.
30. Install cylinder lines A and B.
NOTE:
-
Clean the joints of cylinder lines A and B thoroughly. The joints must be free of foreign material.
-
Install cylinder lines A and B by tighting the flare nuts by hand first, then tighten the flare nuts to the specified torque.
31. Grease the sliding surface of the rack guide, and install it onto the gearbox housing.
32. Apply a thin coat of grease to the new O-ring, and install it on the rack guide screw.
33. Install the spring, rack guide screw and locknut on the gearbox housing.
34. Adjust the rack guide screw.
