TL V6-3206cc 3.2L SOHC MFI (1998)
Lock-Up Control Solenoid Valve A/B: Service and Repair
Replacement
NOTE: Lock-up control solenoid valve A and B must be replaced as an assembly.
1. Remove the mounting bolts and lock-up control solenoid valve assembly.
2. Clean the mounting surface and fluid passages of the lock-up control solenoid valve assembly, and install a new lock-up control solenoid valve NB
with a new filter/gasket.
NOTE: Install the filter/gasket in the direction shown.
3. Check the connector for rust, dirt or oil, then reconnect it securely.