TL V6-3206cc 3.2L SOHC MFI (1998)
8. Install the snap ring.
9. Remove the special tools.
10. Install the disc spring in the direction shown.
NOTE: The 3rd and 4th Clutches do not have the disc spring. (1ST-HOLD CLUTCH)
NOTE: Install the 1st clutch disc spring if it was removed from the 1st clutch piston. (1ST, 2ND and REVERSE CLUTCHES)
11. Soak the clutch discs thoroughly in ATF for a minimum of 30 minutes.
